Как добавить такты в нужную систему?
В Finale легко можно было отправить нужный такт как в верхнюю так и в нижнюю систему. Здесь легко в нижнюю, а в верхнюю не понимаю как? Сейчас в партитуре в 1 системе помещается 16 тактов, а мне к примеру нужно 17? При этом не отображаются system break, то есть я не могу удалить разделитель. Спасибо!
Comments
Я плохо говорю по-русски, поэтому полагаюсь на переводчика. Обычно я понимаю вопросы, но я не понимаю, что происходит с вашим счетом.
In reply to Я плохо говорю по-русски,… by mike320
Sorry, I expected some russian speaking guys here. So, my question is - how can i move measures from one systems (i mean score system, like paragraph in writing) to another? It is easy to move measure to lower system (just hitting Enter button), but i had NO success to move it to the upper/higher system? This is also important if there NO any breaking or grouping icons in display.
In Finale i used up and down arrows and any measure i wanted moved.
Thank you!
In reply to Sorry, I expected some… by alexusfort
This is just a forum where people who want to be part of it are. As you can tell it's not used a lot, so I keep an eye on it for the occasional question that arises.
When you say you want to move a measure up to a previous system, do you mean that you want it after the same measure? One way is to select the measure plus the system above it and press { several times (up to about 10 times removes all of the stretch). This will manually shrink all of the measures so more will fit on a system. Make sure you do not have a system break causing the measure to be on the next line. If you do, remove it before you do anything. Pressing return toggles the system break or you can select it and press delete.
In reply to This is just a forum where… by mike320
I tried your way but i think it do something different. I attached a pic ))
I have empty project, there 18 bars in first/upper system. How it is possible to move bar #19 to upper system? And if there no any system break icons rightside that i could delete to rearrange bars. Thank you!
Sorry for picture, it was light but after saving in paint.net it seems something crashed. But it is still possible to see what i mean
In reply to I tried your way but i think… by alexusfort
That is what I was trying to describe. In you picture, you would select the first measure of the score to the first measure on the second system and press {. Depending on how many notes are in the measures, there might not be room for another measure on the system above. In this case, you will need to make everything smaller. MuseScore will not make things smaller automatically to fit more measures on a system.
Уважаемый alexusfort,
На верхней панели окна программы Musescore можно увидеть вкладку "Формат" --> "Растянуть" --> "Увеличить/уменьшить ширину такта". Вы можете выделить все такты верхней строчки (я правильно понял здесь значение слова система?) при помощи клавиши Shift, а затем нажать "Уменьшить ширину такта", обычно после НЕСКОЛЬКИХ нажатий такты сдвигаются и принимают к себе ещё один, как раз со следующей строчки.
Надеюсь, что мой совет окажется полезным.
С уважением,
Ivan P.